뉴스

MTSCO는 2006년에 설립되어 100개 이상의 국가와 지역의 고객에게 서비스를 제공하고 있습니다.

코일형 튜브를 선택하는 이유는 무엇입니까?

 1. Reduce your cost The coiled tubing we produce can reach more than 1000 meters, which highly reduces the tubing unions and connections during installation, making the installation more convenient, highly reduces the total cost in installation, and also t......

은 더 읽기

직선형 튜브, 밝은 단련 튜브의 장점

 1. Superior surface finish The traditional annealing method is performed in a so called open furnace, where the atmospheric oxygen causes scaling of the heat treated materials, which makes the surface rough. Mtscomaxtech has developed a special bright anne......

은 더 읽기

고급 장비

 There are some difference between other factories and us. 1) Our drawing machine equipment reach more than 70m, and we can produce 53m straight tubes. 2) We have 4 bright annealing furnace. And early next year, we will set up a mesh belt furnace. So, we wi......

은 더 읽기

MtscoMaxtech는 인도 전시회에 참가할 예정입니다

 After finished the TUBE CHINA 2014, in the near future MtscoMaxtech will join the India exhibition. As below are the India exhibition information. If you can come to visit us, it will be our honor. MtscoMaxtech welcome all of you to visit our booth in Ind......

은 더 읽기

ANSI B16.5 스테인레스 스틸 플랜지

ANSI B16.5 stainless steel flanges If you want the complete contents of the standard,please send email to me....

은 더 읽기

EN 10217-7 압력 목적용 용접 강철 튜브 - 기술 인도 조건 - 7부:스테인리스 st

EN 10217-7 Welded steel tubes for pressure purposes-technical delivery conditions-part7:stainless steel tubes   If you want the complete contents of the standard,please send email to me....

은 더 읽기

EN 10216-5:2004 압력 목적용 이음매 없는 강철 튜브 - 기술 납품 조건

EN 10216-5:2004 seamless steel tube for pressure purposes-Technical delivery conditions If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM G 28 - 02 단조, 니켈 함량이 높은 크롬의 입계 부식에 대한 민감성 감지

ASTM G 28 – 02 Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys1 If you want the complete contents of the standard,please send email to me....

은 더 읽기

EN1092-1 플랜지 PN6 EN 1092-1

EN1092-1 flanges PN6 EN 1092-1   If you want the complete contents of the standard,please send email to me....

은 더 읽기

DIN 28011 CAP 파이프 피팅

DIN 28011 CAP If you want the complete contents of the standard,please send email to me....

은 더 읽기

DIN2462 플랜지

DIN2462 FLANGES If you want the complete contents of the standard,please send email to me....

은 더 읽기

DIN 2616 강철 맞대기 용접 파이프 피팅 압력 계수가 감소된 편심 감속기

DIN 2616 steel butt-welding pipe fittings eccentric reducers with reduced pressure factor If you want the complete contents of the standard,please send email to me....

은 더 읽기

EN 10216-2 압력 목적용 이음매 없는 강철 튜브 - 기술 제공 조건 - 파트 2: 비-

EN 10216-2 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties If you want the complete contents of the standard,please send email to me....

은 더 읽기

압력 계수가 감소된 DIN 2615 강철 맞대기 용접 파이프 피팅 티

DIN 2615 steel  butt-welding pipe fittings tee with reduced pressure factor If you want the complete contents of the standard,please send email to me....

은 더 읽기

DIN 2605 강철 맞대기 용접 파이프 피팅 팔꿈치 및 압력 계수가 감소된 굽힘

DIN 2605 steel butt-welding pipe fittings elbowsand bends with reduced pressure factor   If you want the complete contents of the standard,please send email to me....

은 더 읽기

DIN 2527 블라인드 플랜지. /블라인드 플랜지. /블라인드 플랑셰.

DIN 2527 Bridas Ciegas. /Blind Flanges. /Blind flansche. If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM A 182/A 182M - 02 단조 또는 압연 합금강 파이프 플랜지, 단조 피팅 및 밸브 및 Pa

ASTM A 182/A 182M – 02 Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings,,and Valves and Parts for High-Temperature Service1 If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM B 829 - 04a 니켈 및 니켈 합금 이음매 없는 파이프 및 튜브에 대한 일반 요구 사항1

ASTM B 829 – 04a General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube1 If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM B 564-99a

ASTM B 564-99a If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM B 444 - 00e1 니켈-크롬-몰리브덴-콜럼븀 합금(UNS N06625) 및 니켈-크롬-몰리브

ASTM B 444 – 00e1 Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Pipe and Tube1 If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM B 407 - 08 니켈-철-크롬 합금 이음매 없는 파이프 및 튜브1

ASTM B 407 – 08 Nickel-Iron-Chromium Alloy Seamless Pipe and Tube1 If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM B 338 - 99 콘덴서 및 열 교환용 이음매 없는 용접 티타늄 및 티타늄 합금 튜브

ASTM B 338 – 99 Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers1 If you want the complete contents of the standard,please send email to me....

은 더 읽기

ASTM B 167 - 01니켈-크롬-철 합금(UNS N06600, N06601, N06603,N06690, N06693, N06025 및 N

ASTM B 167 – 01Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603,N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube1   If you want the complete contents of the standard,please send e......

은 더 읽기

ASTM B 163 - 04 이음매 없는 니켈 및 니켈 합금 콘덴서 및 열교환기 튜브1

ASTM B 163 – 04 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes1 If you want the complete contents of the standard,please send email to me....

은 더 읽기